ASME B16.20 300LB 316SS Oval Ring Joint Gasket

ASME B16.20 300LB 316SS Oval Ring Joint Gasket

=

Description

Stainless Steel: Seals Ring Api: Gasket
Wellhead: Ring Joint Gasket Raw Material: Carbon Stell
Material: Soft Iron Standard: API 6a
Subsea: Gasket

High Light: 316SS oval ring joint gasket, 300LB flat ring gasket, 300LB ring joint flange

R Series NPS Class Ratings
Oval Oval
• The original ring joint design.
• Used to standard ring joint flat bottom groove flanges.
• Can be used on older round bottom groove flanges.
• Available in ring no. R11 to R105.
½”-24”
26”-36”
26”-36”
1½”-20”
150-2500 ANSI B16.5 & BS1560
300-600 MSS SP44 & BS3293
900 MSS SP44
API 6A Spec.

Functional description

Under axial compressive load, ring type joints plastically deform and flow into the irregularities of the flange groove. Since the contact area of the ring type joint is relatively small, a very high compressive load results between the sealing surface of the ring type joint and the flange groove. This surface pressure is further increased especially by the RX and BX RTJ variants. Both variants are able to seal extremely high internal pressures. RTJ gaskets are produced from metal, so they remain in their compressed form, even when the surface pressure is relaxed. The sealing function of the RTJ gasket is reinforced by the axial forces acting on the sealing surfaces.

Materials

RTJ gaskets are available as standard in soft metal and in 304, 316 and stainless steels. Versions in other materials on request.

 

Style R ring type joints are manufactured on oval (2962/R) and octagonal profiles (2961/R).
Both styles are interchangeable in the modern flat bottomed groove.
Octagonal profile joints are interchangeable on flat bottomes groove flanges which have a 23 degree angle groove wall

Advantages

  • Metal-to-metal contact creates a reliable seal
  • Suitable for extreme pressure and temperature requirements
  • Certified quality (including surface hardness)

we supplies ring joint gaskets (RTJ Gasket) with the hardness numbers as follows:

GASKET MATERIALS BRINELL HARDNESS NUMBER
(max)
ROCKWELL HARDNESS NUMBER (max) IDENTIFICATION
Soft iron 90 56 D
Low carbon steel 120 68 S
4-6% Chrome 1/2% molybdenum 130 72 F5
304 Stainless Steel 160 83 S304
316 Stainless Steel 160 83 S316
347 Stainless Steel 160 83 S347

 

 

Common Materials
Material HB Hardness Temperature Limitations Identification
Soft Iron 90 -60 to +400 °C D
Low carbon steel 120 -40 to +500°C S
4%-6% Cr ½% Mo:F5 130 -125 to +500°C F5
Stainless steel 304/304L 160 -250 to +650°C S304 or 304L
Stainless steel 316/316L 160 -196 to +800°C S316 or 316L
Stainless steel 321 160 -250 to +870°C S321
Stainless steel 347 160 -250 to +870°C S347
Stainless steel 410 170 -20 to +500°C S410
Inconel 625 1000°C 625
Incoloy 825 1000°C 825
Hastelloy C-276 1000°C C-276
Duplex 800°C S31803
Titanium 540°C TI

We specializes in ring joint gasket, including ring gasket in R, RX, BX, IX types, lens gasket, weld ring gasket and bonnet gasket(according to client’s drawing). The metal gasket designed for use in high pressure, high temperature application necessitated the need for a high integrity seal. Our products are widely used in flat gate valve, Christmas tree, pipeline fittings, flange, high pressure vessel, oil &gas industry, wellhead assembly, petrochemical industry and the like.
We can offer more than 30 kinds of materials, such as 321SS, 347SS, 316SS, 304SS, Inconel 625, Monel 400, INCOLY 825, Nickel 200, Duplex F44, soft iron, low carbon steel and so on. We could produce the maximum outside diameter is 2500mm.

Programming interface ring Joint gaskets come in two fundamental sorts, an oval cross segment and an octagonal cross segment. These essential shapes are utilized in pressures up to 10,000 Rubber Seals and Gasket. The measurements are institutionalized and require uniquely notched spines. The octagonal cross segment has a higher fixing proficiency than the oval and would be the favored gasket. Be that as it may, just the oval cross segment can be utilized in the old sort round base notch. The more up to date level base furrow configuration will acknowledge either the oval or the octagonal cross segment. The fixing surfaces on the ring joint sections must be easily completed to 63 smaller scale inches and to be liberated from shocking edges, apparatus or babble marks. They seal by an underlying line contact or an edging activity as the compressive powers are applied.

Request a Quote
=