High Pressure 300LB API R Soft Iron Ring Gasket

Description

Standard: API 6A,ASME/ANSI B16.5,BS1560

High Light:  API R soft iron ring gasket, 300LB weld ring gasket, API R weld ring gasket

SEALS RING GASKET high pressure and high-temperature according to API 6a asme16.20

we supplies ring joint gaskets (RTJ Gasket) with the hardness numbers as follows:

Ring Type Joints are a kind of forged ring which will be installed into the machined groove of an RTJ flange. After tightening the bolts, the ring joints will be compressed between the flanges into the grooves, and the rings will give an efficient sealing function after deforming. In this way, the metals material for the API ring gaskets is typically chosen to be softer than the flange material in order to prevent any damages to the flanges.

Ring joint gaskets are widely used in refinery, petrochemical and oil field drilling industries. and the rings are generally used for high pressure and high-temperature applications.

‘R’ series Ring Type Joints can contain pressure up to 10,000 PSI.

Programming interface ring Joint gaskets come in two fundamental sorts, an oval cross segment and an octagonal cross segment. These essential shapes are utilized in pressures up to 10,000 Rubber Seals and Gasket. The measurements are institutionalized and require uniquely notched spines. The octagonal cross segment has a higher fixing proficiency than the oval and would be the favored gasket. Be that as it may, just the oval cross segment can be utilized in the old sort round base notch. The more up to date level base furrow configuration will acknowledge either the oval or the octagonal cross segment. The fixing surfaces on the ring joint sections must be easily completed to 63 smaller scale inches and to be liberated from shocking edges, apparatus or babble marks. They seal by an underlying line contact or an edging activity as the compressive powers are applied.

There’s a variety of material can be selected for a ring gasket according to a different application.