Description
Bonded Bottom Seals do not have a retention base structure but are bonded in a square channel on the bottom. Relative to other types, bonded rim seals may cover full seal gaps. Up to 90-100 percent of their original height can be inflated.
4-A Non-Reinforced Construction
Crown
Section |
Type |
Width(W)mm |
Width(W)in |
Height(H)mm |
Height(H)in |
Inflation Gap(H1)mm |
Inflation Gap(H1)in |
Air Inlet valve(AIV) |
|---|---|---|---|---|---|---|---|---|
| WR-4A01 | C | 13.72 | 0.54 | 11.17 | 0.44 | 9.53 | 0.38 | 2B, 3B, 4A |
| WR-4A02 | C | 16.66 | 0.66 | 11.1 | 0.44 | 11.13 | 0.44 | 2B, 3B, 4A |
| WR-4A03 | C | 25 | 0.98 | 25 | 0.98 | 23.8 | 0.94 | 2C, 3C, 4B |
| WR-4A04 | C | 35 | 1.38 | 32 | 1.26 | 30 | 1.18 | 2C, 3C, 4B |
4-B Non-Reinforced Construction
Crown
Bald
Section |
Type |
Width(W)mm |
Width(W)in |
Height(H)mm |
Height(H)in |
Inflation Gap(H1)mm |
Inflation Gap(H1)in |
Air Inlet valve(AIV) |
|---|---|---|---|---|---|---|---|---|
| WR-4B01 | C | 13.8 | 0.54 | 11.2 | 0.44 | 11.2 | 0.44 | 4A |
| WR-4B02 | C | 17.6 | 0.69 | 11.7 | 0.46 | 13.8 | 0.54 | 4A |
| WR-4B03 | C | 44.5 | 1.75 | 35.1 | 1.38 | 31.8 | 1.25 | 4A, 4B |
| WR-4B04 | C | 35.1 | 1.38 | 28.8 | 1.13 | 25.4 | 1 | 4A, 4B |
| WR-4B05 | C | 10 | 0.39 | 7.7 | 0.3 | 7.7 | 0.3 | 4A |
| WR-4B06 | C | 7.7 | 0.3 | 7.7 | 0.3 | 7.2 | 0.28 | |
| WR-4B07 | C | 13 | 0.51 | 8.7 | 0.34 | 8 | 0.31 | 4A |
| WR-4B08 | B | 22.4 | 0.88 | 14.3 | 0.56 | 11.2 | 0.44 | 4A, 4B |
| WR-4B09 | B | 50.8 | 2 | 25.4 | 1 | 19.9 | 0.78 | 4A, 4B, 4C |
| WR-4B10 | B | 69.9 | 2.75 | 35.1 | 1.38 | 28.5 | 1.12 | 4B, 4C |
| WR-4B11 | B | 35.1 | 1.38 | 30.3 | 1.19 | 17.8 | 0.7 | 4A, 4B |
| WR-4B12 | B | 16.1 | 0.63 | 12.7 | 0.5 | 11.5 | 0.45 | 4A |
