Peek Products
Categories
-
2” to 4” Wafer Vacuum Tip – PEEK
- Spec: Apply to 2" (50mm) to 4" (100mm) With knife edge Material: PEEK - 260°C Continuous Using PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high…
-
2” to 4” Wafer Vacuum Tip – Polyimide
- Spec: Apply to 2" (50mm) to 4" (100mm) With Knife edge Material: Polyimide - 360°C Continuous Using Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus and stiffness also at high temperatures over 260 °C Excellent wear resistance under high surface pressure and high…
-
Carbon fiber PEEK bushing
- Carbon fiber PEEK bushing Polyetheretherketone Natural (beige), BlackPolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high strength, dimensional stability and stiffness. PEEK can be continuously exposed to hot…
-
Carbon Fiber PEEK Sealing
- PEEK is a special engineering plastic with excellent comprehensive properties. In the application of sealing rings, especially high pressure sealing, due to its excellent compression resistance, fatigue resistance, corrosion resistance, temperature resistance, it can meet the sealing requirements of different occasions. PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of…
-
Carbon PEEK Gear
- Polyetheretherketone - Natural (beige), Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
High Performance Beaing Grade PEEK HPV Bushing
- High Performance Beaing Grade PEEK HPV Bushing Material: PEEK HPV | Bearing Grade PEEK, Black Features: Excellent Chemical Resistance Great Wear Properties High Limiting PV High Temperature Resistance Higher strength & Stiffness than Unfilled PEEK Low Wear on Mating Parts Lower Thermal Expansion than Unfilled PEEK Unaffected by continuous exposure to hot water or steam Very Low Moisture Resistance
-
High Temperature Pick Up Tool
- High temperature plastic pick up tool is a precision component specially used to absorb and place electronic components such as chips. It improves the indentation caused by the high hardness of the tungsten steel tip when sucking the LED chips, improves the yield rate of semiconductor packaging.
-
Nozzle Tip Insulator HPN 5233073
- Nozzle Tip Insulator HPN 5233073 The nozzle tip insulator (Gate insualtor) is made of Polyimide material, used for injection molding thermoplastic such as PET bottle preforms. As thermal insulation of molten plastic to prevent freeze-off of the plastic while awaiting injection inside the hot runner system, and allowing easy color transfer between production batches, reducing downtime of the tool.
-
PA66 GF30 Cabel Guide
- PA66 GF30 is a 30 % glass fibre reinforced PA66. It has outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability. Compared to unreinforced PA66, the properties of this glass filled modification GF30 make this material suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.
-
PA66 GF30 Gear
- PA66 GF30 is a 30 % glass fibre reinforced PA66. It has outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability. Compared to unreinforced PA66, the properties of this glass filled modification GF30 make this material suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.
-
PEEK back-up Ring for Compressor
- Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Ball Bearing
- PEEK Ball Bearing Polyetheretherketone Natural (beige), Black PEEK ball bearings operate in much higher temperatures than other plastic ball bearings. They also have good chemical resistance and excellent corrosion resistance. The purpose of a PEEK ceramic hybrid radial bearing is to withstand high temperatures and corrosion, reduce rotational friction and support loads. Benefits & Advantages of PEEK Ball Bearing • High temperature…
