Peek Products
Categories
-
2” to 4” Wafer Vacuum Tip – PEEK
- Spec: Apply to 2" (50mm) to 4" (100mm) With knife edge Material: PEEK - 260°C Continuous Using PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high…
-
2” to 4” Wafer Vacuum Tip – Polyimide
- Spec: Apply to 2" (50mm) to 4" (100mm) With Knife edge Material: Polyimide - 360°C Continuous Using Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus and stiffness also at high temperatures over 260 °C Excellent wear resistance under high surface pressure and high…
-
Carbon fiber PEEK bushing
- Carbon fiber PEEK bushing Polyetheretherketone Natural (beige), BlackPolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high strength, dimensional stability and stiffness. PEEK can be continuously exposed to hot…
-
Carbon Fiber PEEK Sealing
- PEEK is a special engineering plastic with excellent comprehensive properties. In the application of sealing rings, especially high pressure sealing, due to its excellent compression resistance, fatigue resistance, corrosion resistance, temperature resistance, it can meet the sealing requirements of different occasions. PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of…
-
Carbon PEEK Gear
- Polyetheretherketone - Natural (beige), Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
High Performance Beaing Grade PEEK HPV Bushing
- High Performance Beaing Grade PEEK HPV Bushing Material: PEEK HPV | Bearing Grade PEEK, Black Features: Excellent Chemical Resistance Great Wear Properties High Limiting PV High Temperature Resistance Higher strength & Stiffness than Unfilled PEEK Low Wear on Mating Parts Lower Thermal Expansion than Unfilled PEEK Unaffected by continuous exposure to hot water or steam Very Low Moisture Resistance
-
High Temperature Pick Up Tool
- High temperature plastic pick up tool is a precision component specially used to absorb and place electronic components such as chips. It improves the indentation caused by the high hardness of the tungsten steel tip when sucking the LED chips, improves the yield rate of semiconductor packaging.
-
Nozzle Tip Insulator HPN 5233073
- Nozzle Tip Insulator HPN 5233073 The nozzle tip insulator (Gate insualtor) is made of Polyimide material, used for injection molding thermoplastic such as PET bottle preforms. As thermal insulation of molten plastic to prevent freeze-off of the plastic while awaiting injection inside the hot runner system, and allowing easy color transfer between production batches, reducing downtime of the tool.
-
PA66 GF30 Cabel Guide
- PA66 GF30 is a 30 % glass fibre reinforced PA66. It has outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability. Compared to unreinforced PA66, the properties of this glass filled modification GF30 make this material suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.
-
PA66 GF30 Gear
- PA66 GF30 is a 30 % glass fibre reinforced PA66. It has outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability. Compared to unreinforced PA66, the properties of this glass filled modification GF30 make this material suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.
-
PEEK back-up Ring for Compressor
- Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Ball Bearing
- PEEK Ball Bearing Polyetheretherketone Natural (beige), Black PEEK ball bearings operate in much higher temperatures than other plastic ball bearings. They also have good chemical resistance and excellent corrosion resistance. The purpose of a PEEK ceramic hybrid radial bearing is to withstand high temperatures and corrosion, reduce rotational friction and support loads. Benefits & Advantages of PEEK Ball Bearing • High temperature…
-
PEEK Ball Valve Seats
- PEEK is a special engineering plastic with excellent comprehensive properties. In the application of sealing rings, especially high pressure sealing, due to its excellent compression resistance, fatigue resistance, corrosion resistance, temperature resistance, it can meet the sealing requirements of different occasions. PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of…
-
PEEK Balls
- PEEK Balls PEEK balls are widely used in semiconductor, food packaging, automobile manufacturing and other industries. Compared with traditional metal balls and rubber balls, PEEK has unparalleled advantages: good wear resistance and self-lubrication; high compressive strength; low creep Lighter than metal for quick response; no damage to metal seats; noise reduction; good mechanical properties; good chemical resistance, which helps protect…
-
PEEK COMB WAFER RETAINER
- PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high strength, dimensional stability and stiffness. PEEK can be continuously exposed to hot water or steam with no…
-
PEEK COMB WAFER SUPPORT
- PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. It combines exceptional wear, chemical and moisture resistance with very high strength, dimensional stability and stiffness. PEEK can be continuously exposed to hot water or steam with no…
-
PEEK Dental Disc
- PEEK Dental Disc Application: Dental Crown, Dental Bridge, Denture and etc. General Dimension 98*(10/12/14/16/18/20/22/25/26)mm 95*(10/12/14/16/18/20/22/25/26)mm AG*(12/14/16/18/20/25/26)mm Color: Natural, White, Yellow, Pink
-
PEEK Fastener PEEK Screw
- Polyetheretherketone - Natural Beige, Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Flanged Bushings
- Polyetheretherketone - Natural (beige), Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Flat Head Phillips Screw
- PEEK Flat Head Phillips Screw
-
PEEK Fluid Body PEEK Fluid Housing for Jetting Valve
- PEEK Fluid Body PEEK Fluid Housing for Jetting Valve Polyetheretherketone Natural (beige), Black Advantages: • Suit for reactive adhesives like anaerobics • Fast and easy serviceability and maintenance • Easy cleaning • High temperature resistance Jetting valve technology enables high-speed, continuous, non-contact dispensing of dots of extremely small size, while offering a high degree of accuracy and repeatability. Jetting valves may…
-
PEEK Helical Gears
- PEEK Helical Gears Polyetheretherketone - Natural (beige), Back Normal module (Mn): 0.7 Normal pressure angle (αn): 20° Number of teeth (Z): 16 Reference cylinder helix angle (β): 15° Helical direction: L, R (CCW, CW) Advantages of PEEK helical gears: Reduced noise, low density, light weight Reduced moment of Inertia Excellent chemical resistance Excellent resistance to grease and automotive fuel Low hygroscopicity, no expansion,…
-
PEEK Hex Socket Head Cap Screws
- PEEK Hex Socket Head Cap Screws
-
PEEK Insert Ring, Seat Insert
- Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Insulated Outer Tube for Laparoscopic Instruments
- PEEK Insulated Outer Tube for Laparoscopic Instruments Material: PEEK Black Available Diamater: Φ5mm, Φ10mm and Customized L 330mm, 450mm or Customized Features: - Excellent insulation properties The insulation strength of 5KV can be reached by 0.2mm on one side - Robust material maintains integrity during sterilization cycles
-
PEEK insulating tube for laparoscopy forceps
- PEEK insulating tube for laparoscopy forceps Material: PEEK Available Diamater: Φ5mm, Φ10mm and Customized Features: - Excellent insulation properties The insulation strength of 5KV can be reached by 0.2mm on one side - Robust material maintains integrity during sterilization cycles
-
PEEK Manifold
- PEEK Manifold Polyetheretherketone Natural (beige), grey, Black Properties Superior wear resistance and dimensional stability to 480°F continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing FDA, USDA, 3-A Dairy compliant
-
PEEK Monofilament PEEK Fiber
- PEEK Monofilament, PEEK Fiber Available Diameter: 0.06; 0.07; 0.10; 0.15; 0.20; 0.28; 0.30; 0.35; 0.38; 0.40; 0.45; 0.50; 0.55; 0.60; 0.70; 0.80; 0.90; 1.00mm; Or Customized. Color: Natural & Black Other colors can be customized
-
PEEK Mounting Blocks
- PEEK Mounting Blocks Polyetheretherketone Natural (beige), grey, Black Properties Superior wear resistance and dimensional stability to 480°F continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing FDA, USDA, 3-A Dairy compliant
-
PEEK Nozzle inserts for Piezoelectric Jet Dispensing Valve
- PEEK nozzle inserts for Piezoelectric Jet Dispensing Valve Advantages: • Suit for reactive adhesives like anaerobics • Fast and easy serviceability and maintenance • Easy cleaning • High temperature resistance
-
PEEK Pan Head Phillips Screw
- PEEK Pan Head Phillips Screw
-
PEEK Pan Head Slotted Screw
- PEEK Pan Head Slotted Screw
-
PEEK Plating Fixture
- Polyetheretherketone - Natural (beige), black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Radial Ball Bearings
- PEEK Radial Ball Bearings Polyetheretherketone Natural (beige), Black PEEK radial ball bearings operate in much higher temperatures than other plastic ball bearings. They also have good chemical resistance and excellent corrosion resistance. The purpose of a PEEK ceramic hybrid radial bearing is to withstand high temperatures and corrosion, reduce rotational friction and support loads. Benefits & Advantages of PEEK Radial Ball…
-
PEEK Sealing
- PEEK is a special engineering plastic with excellent comprehensive properties. In the application of sealing rings, especially high pressure sealing, due to its excellent compression resistance, fatigue resistance, corrosion resistance, temperature resistance, it can meet the sealing requirements of different occasions. PolyEtherEtherKetone (PEEK) Maintains wear resistance and mechanical strength up to 260℃ continuous use. PEEK is the performance material of…
-
PEEK Sleeve
- Polyetheretherketone - Natural (beige), Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK Spindle Nut for Monforts Stenter
- PEEK Spindle Nut for Monforts Stenter Material: PEEK Spec.: Tr 44 x 7, Tr 45 x 8
-
PEEK Spur Gear
- Polyetheretherketone - Natural (beige), Black Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
PEEK VACUUM PAD
- • PEEK vacuum pad for gentle and mark-free gripping and depositing of smooth workpieces • Application with crystalline solar cells, thin-film modules and wafers / substrates in the semiconductor industry • Handling of glass such as display glass, thin glass or coated glass without leaving a chemical fingerprint by elastomers
-
PEEK Valve Seat
- Properties Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
Polyimide Components
- Polyimide (PI) Polyimide is a non melting high temperature polymer. Strength, dimensional stability, and creep resistance remain high even at temperatures above 260°C. Low wear rates combined with the ability to work under unlubricated conditions and high pV-rates makes it the ideal material for challenging friction and wear applications, extending lifetime and reducing maintenance costs. Its high purity and low…
-
POLYIMIDE COMPONENTS FOR SEMICONDUCTOR AND LCD INDUSTRY
- Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus and stiffness also at high temperatures over 260 °C Excellent wear resistance under high surface pressure and high sliding speeds Excellent thermal and electrical insulation Minimal thermal conductivity High purity, low outgassing in vacuum conditions…
-
POLYIMIDE GLASS HOLDER FOR LCD GLASS PANEL
- Polyimide glass holder is used for hold the LCD glass panel in glass heating progress. It has excellent properties of high temperature resistance, thermal insulation, low gas release, creep resistance. Material: Polyimide (PI) Features: High temprature resistance Wear resistance in the non-lubricant condition Free of particle generation Click Here for Material Datasheet →
-
POLYIMIDE LIFT PIN FOR LCD GLASS
- Polyimide Lift pin is used for supporting and lifting the LCD glass panel at LCD manufacturing progress. Polyimide has excellent properties of no partical release, low out gassing and stable machenical strength at high temperature. Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus…
-
POLYIMIDE ROLLER FOR LCD & CRT CONVEYOR SYSTEM
- It is a roller for LCD & CRT conveyor system in drying or wet process. Material: Polyimide (PI) Features: High temperature resistance Wear resistance in the non-lubricant condition Free of particle generation Click Here for Material Datasheet →
-
Polyimide take-out insert for Hot Glass Handling
- Polyimide take-out insert for Hot Glass Handling A range of high-performance materials for hot glass handling in applications such as tableware, glass containers, cosmetic and perfume bottles, and medical glass. With a composite structure that offers good mechanical strength and superior resistance to abrasion, and a formulation that provides an excellent stability at high temperatures, Tactylit is a unique material that…
-
POLYIMIDE(PI) HEX HEAD SCREWS
- Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus and stiffness also at high temperatures over 260 °C Excellent wear resistance under high surface pressure and high sliding speeds Excellent thermal and electrical insulation Minimal thermal conductivity High purity, low outgassing in vacuum conditions…
-
Polyimide(PI) Socket Head Cap Screw
- Special properties of Polyimide (PI) Long-term thermal stability 300 °C (short-term up to 400 °C) Good cryogenic properties down to -270 °C High strength, modulus and stiffness also at high temperatures over 260 °C Excellent wear resistance under high surface pressure and high sliding speeds Excellent thermal and electrical insulation Minimal thermal conductivity High purity, low outgassing in vacuum conditions…
-
Wafer handling tool Manual Wand for 12” wafer
- Polyetheretherketone Natural (beige), black Properties : Superior wear resistance and dimensional stability to 260℃ continuous use Excellent resistance to chemicals, steam and hydrolysis Very low moisture absorption Very high thermal stability (V-O UL 94 rating) Superb flexural and torsional strength Abrasion resistant Good dielectric properties Good resistance to radiation Self-extinguishing
-
White Color PEEK Dental Disc
- White Color PEEK Dental Disc System: 98 Color: White General Dimension 98*(12/14/16/18/20/22/25/26)mm 95*(12/14/16/18/20/22/25/26)mm AG*(12/14/16/18/20/25/26)mm Color: Natural, White, Yellow, Pink
-
Yellow Color PEEK Dental Block
- Yellow Color PEEK Dental Block System: 98 Color: Yellow General Dimension 98*(12/14/16/18/20/22/25/26)mm 95*(12/14/16/18/20/22/25/26)mm AG*(12/14/16/18/20/25/26)mm Color: Natural, White, Yellow, Pink
