Aramid Wire Wiping Pads

At Kriloha Ltd., we recognize that in the wire and cable industry, “Consistency” is the difference between a high-quality product and a scrap-load. A pad that wears out unevenly creates “thick spots” and “snags” on your wire. The Kriloha Aramid Wire Wiping Pad is our engineered answer for high-speed surface management. As a premier global provider of industrial braided materials, Kriloha Gaskets has mastered the High-Density Needle-Punch and braiding technology required to create a pad that stands up to the constant friction of moving metal.

The engineering of our Aramid Pads is based on Surface Conformity. Unlike rigid metal scrapers, the Aramid fiber matrix “hugs” the circumference of the wire. This ensures that 100% of the surface area is wiped simultaneously. At Kriloha, we utilize a specialized “heat-set” Aramid yarn that prevents the fibers from fraying or “linting,” which is critical in maintaining the purity of the coating.

Manufacturing these pads at Kriloha involves strict Thickness-Uniformity Calibration. We ensure that the pads provide equal pressure on all sides of the wire to prevent “ovalization” of the coating. Whether you are running a high-speed galvanized steel line or a delicate copper drawing process, Kriloha Aramid Wire Wiping Pads provide the mechanical invincibility and thermal stamina your production line demands. By choosing Kriloha Ltd., you are investing in a “Precision-Finish” technology that reduces waste and maximizes your line efficiency.

Primary Use Cases

Wire Galvanizing Lines: Used to wipe away excess molten zinc as the wire exits the bath, ensuring a smooth, uniform coating thickness.
Cable Extrusion: Stripping away excess cooling water or lubricants from the surface of plastic-jacketed cables during high-speed production.
Steel Pickling & Cleaning: Removing acidic residues and scale from metal rods and wires before drawing or coating.
Copper Wire Drawing: Providing a clean, debris-free surface for high-purity electrical wire production.
Lubricant Control: Managing the application of drawing lubricants to ensure the wire enters the die at the perfect level of saturation.

FAQs

Why use Aramid instead of traditional Felt or Wool pads?

Felt and wool pads burn or char at high temperatures and wear down quickly. Aramid lasts significantly longer, handles much higher heat (essential for molten zinc), and does not leave organic residue on the wire.

Can these pads be used with oils and lubricants?

Yes. Aramid fibers are highly resistant to oils and industrial lubricants. They act as an excellent “metering” device, allowing you to control exactly how much lubricant remains on the wire surface.

How are the pads installed in the machine?

They are typically held in a Wiping Box or a spring-loaded clamp. The pads are placed on either side of the wire, and the tension is adjusted to achieve the desired coating thickness or dryness.

Are the pads available in different shapes?

Yes. Kriloha offers Aramid wiping solutions in Flat Sheets, Pre-Cut Pads, and Braided Square Cord depending on the specific design of your wiping equipment.

How do I know when to replace the pads?

Pads should be replaced when you notice a “streak” or an uneven coating on the wire, or when the physical thickness of the pad has worn down to the point where the tensioning device can no longer apply even pressure.